Dimplex BWP 20A, Installation And Operating Instructions Manual

Page: 23 / 44

www.gdts.one 451903.66.07 · FD 9908 EN-9
BWP 20A English
11 Technical Data
Device information for hot water heat pumps
1 Type and order code
BWP 20A
2 Design
Without internal heat exchanger
2.1 Nominal cylinder volume l 200
2.2 Cylinder material Enamelled steel according to DIN 4753
2.3 Nominal cylinder pressure bar 10
3 Model
3.1 Dimensions height (max.) x cross-section (max.) mm 1700 x 550
3.2 Weight (empty) kg Approx 96
3.3 Electrical connection (plug-in - lead length approx. 2.7 m) 1/N/PE ~ 230V, 50Hz
3.4 Fuse A 16
3.5 Refrigerant / total filling weight - / kg R134a / 1.0
3.6 GWP value / CO
2
equivalent --- / t
1430 / 1
3.7 Refrigeration circuit hermetically sealed yes
4 Performance data
4.1 Range of operating temperatures
±1,5 K
) °C
15 to 35
4.2 Selectable water temperature (heat pump operation
±1.5 K
) °C
23 to 60
4.3 Heating-up period from 15°C to 45°C at (L20 / F50) h 7.2
4.4 Power consumption supplementary electrical heating W 1500
4.5 Mean power consumption
1
at 45 °C W
1. Heating-up of nominal volume from 15 C to 45 C at L20/F50 = Exhaust air temperature 20 C and exhaust air humidity 50%
256
4.6 Mean heat output
1
at 45 °C W
970
4.7 COP
(t)
according to EN 255 at 45 °C -
3.68
4.8 Sound pressure level
2
dB(A)
2. At a distance of 1m (free-standing installation or installation without exhaust air duct or 90° pipe bends on outlet side) The specified sound pressure level represents the free sound
area level. The measured value can be up to 16 dB(A) higher, depending on the installation location and conditions within the building.
44.5
4.9 Air flow (with air duct) m
3
/h
140
4.10 External compression Pa 110
4.11 Maximum air duct connection length (total) m 10
4.12 Diameter of the air duct connection mm 125
4.13 Hot water connection - outlet External thread R3/4“
4.14 Cold water connection - inflow External thread R3/4“