Important Safety Advice
WARNING:
This appliance must not be used in
a bathroom.
WARNING:
Do not use this heater in the immediate
surroundings of a bath, a shower or a swimming
pool.
WARNING:
This heater must not be located
immediately below a fixed socket outlet.
The heater carries a warning symbol to alert
the user to the risk of fire that exists if the
heater is accidentally covered.
WARNING:
In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience or knowledge if they have been given
supervision or instruction concerning the use of
the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
not be made by children without supervision.
Children of less than 3 years should be kept away
unless continuously supervised. Children aged
from 3 years and less than 8 years shall only switch
on/off the appliance provided that it has been
placed or installed in its intended normal operating
position and they have been given supervision or
instruction concerning the use of the appliance in
a safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years
shall not plug in, regulate and clean the appliance
or perform user maintenance.
CAUTION:
Some parts of this product can become
very hot and cause burns. Particular attention has
to be given where children and vulnerable people
are present.
WARNING:
Do not use the heater in small rooms
when they are occupied by persons who are not
capable of leaving the room on their own, unless
constant supervision is provided.
WARNING:
To reduce the risk of fire, keep
textiles, curtains or any other flammable material
a minimum distance of 1m from the air outlet.
Do not use the heater if it has been dropped.
Do not use the heater if there are any visible signs
of damage.
If the mains lead is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard.
The heater should only be used on a horizontal
and stable surface with the feet securely fitted
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED
The use of an extension lead or multi-plug adaptor is not advised when
connecting this product to the mains. Connection through these devices could
lead to a risk of overloading, overheating and even fire at the extension lead
or adaptor due to inadequate connection quality.
This heater must be used on an ~ supply only and the voltage marked on
the heater must correspond to the supply voltage. This heater is fitted with
a rewireable plug incorporating a 13 amp fuse. In the event of replacing the
fuse in the plug supplied, a 13 amp fuse approved by ASTA to BS 1362 must
be used. If any other type of plug is used, a 15 amp fuse must be fitted in
the plug, the adaptor, or at the distribution board.
IMPORTANT : If the plug is not suitable for your socket, the 13 amp plug
should be removed. Before wiring the appropriate plug, please note that the
wires in this mains lead are coloured in accordance with the following code
:
GREEN AND YELLOW:
EARTH
BLUE
:
NEUTRAL
BROWN
: LIVE
Connect the
GREEN AND YELLOW
wire to the terminal marked ‘
E
’ or by the
earth symbol , or coloured
GREEN
or
GREEN AND YELLOW
.
Connect the
BROWN
wire to the terminal marked ‘
L
’ or coloured
RED
.
Connect the
BLUE
wire to the terminal marked ‘
N
’ or coloured
BLACK.
Dimensions
(Millimetres)
Installation and Operating Instructions
Dimplex Convector Heater
Models :
402BT
08/53798/0 Issue 1
IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Fig. 1
