26370300_V_1_0.DOC
9/10
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
OVERVIEW
OPERATION
Install the device on a plane surface.
Operation via the optional power-unit
Connect the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.
Inserting/Replacing the battery
Please refer to the explanations under Operating Determinations.
Open the battery cover on the bottom and remove it.
If replacing the battery, remove the old battery from the battery compartment.
Caution!
Danger of explosion when battery is replaced improperly.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
(1)
RATE Knob – Speed of phase shift (tremelo) is
increased when turned clockwise, decreased
when turned counterclockwise.
(2)
RES Knob – Controls the amount of feedback,
is increased when turned clockwise, decreased
when turned counterclockwise
(3)
DEPTH Knob – Controls the depth of phase
shift, is increased when turned clockwise,
decreased when turned counterclockwise
(4)
Output Jack – connects the unit to amplifiers or
other devices
(5)
AC Adaptor Jack – accepts connection of an
AC adaptor
(6)
Input Jack – accepts input signals(musical
instrument, effect unit, etc)
(7)
Check Indicator – ON/OFF indicator as well as
battery check indicator
(8)
Pedal Switch – turns the effect ON/OFF
(9)
Battery Housing – 9 V battery
