Chapter 4 - Screen Description
29
FUJIFILM Dimatix, Inc. Confidential Information
Doc. # PM000040 Rev. 01
March 26, 2008
4.0
Waveform Editor
The waveform editor is where you make changes to the waveform by adding or deleting
segments, make changes to the segments, or rescale a waveform.
Figure 4 - 8 Waveform Editor screen
This is the control screen for the electrical signal that triggers the drop ejection. The signal
consists of multiple segments (four in the above example). To adjust a segment, simply
point your with your mouse and click on it. The selected segment changes from blue to
red.
The
Waveform Basics
chapter, later in this manual, describes how changing the waveform
affects drop ejection. There is an application note available through
E-Commerce on the FUJIFILM Dimatix home page that elaborates on this topic.