Receiver’s to anything you wish (32 character Limit) as well as get
additional control of your SKAA devices.
1.2 Headphone Operating Instructions
Symbol
Description
Power Button –
Press and hold for 1 second to power the
headphones On. Also, Press and hold for 1 second to power the
headphones Off.
Bond Button
– Used to select which audio source to play from. This
button uses single, multiple or click and hold actions to control
selections. (Note: this button uses the same click actions as one would
use controlling a computer mouse or track pad) See the SKAA
operating Instructions section for a link to
download the “SKAA
Receiver user’s guide” for more info
on what all this clicky stuff
does.
- part of a rocker style switch with Vol -. Pressing this
button will increment the volume up one step for every press or if held
down will scroll volume up for as long as the button is held or until
Max Vol is reached.
Volume -
- part of a rocker style switch with Vol +. Pressing this
button will increment the volume down one step for every press or if
held down will scroll volume down for as long as the button is held or
until Min Vol is reached.
SKAA Indicator
– Indicates the status of your bond with
any SKAA Transmitter. This indicator will display different
colors which indicate the type of bond, and bond status. IE: Dim for
un-bonded, bright for bonded and slow flashing for mute indication.
See SKAA Operating Instructions section for linc to download the SKAA
Receiver user’s guide.
Basic operating modes:
1. Amber Mode – Headphones are ready to bond with any SKAA
Transmitter on and in range. (If there are SKAA Transmitter’s
on the Headphones green list then in this mode the
headphones will automatically bond with any New SKAA
Transmitter and will not automatically bond to a Transmitter
already on the Green List)
2. Green Mode – In this mode the Headphone will bond with the
last green listed Transmitter it saw. If there are more than 1
Transmitter on the Headphones green list it will step through
