100
Introduction
Thank you for purchasing the Helix Wireless Headphones from Dillinger Labs
using the new SKAA standard. See www.SKAA.com/TLC
SKAA Transmitters and Receivers such as the Helix Headphones bond and play
audio seamlessly.
1.1 Quick Start Guide
Please use this section as it is intended which is to get you up and running
quickly. Once you have your headphones operating please read the following
sections to learn how to get the most out of your SKAA headphones.
1. On the headphones Left ear cup locate the power button, press
and hold it down for 1 second.
2. The SKAA indicator will light dim Amber (Lower Right part of the
colored ring on the Left cup)
3. Plug in any SKAA Transmitter and play audio. IE: Plug in your Ursula
(USB Transmitter) into your computer USB port and play audio from
your favorite player. You may need to open the Volume Mixer on your
computer to select the SKAA Transmitter as the playback device. Or if
you have a Ryobi Transmitter play audio from it.
4. The SKAA indicator will go Bright Amber indicating you are bonded to
that Transmitter and you should now be hearing audio from the
headphones.
5. Note: After 30 min of continuous listening to audio (in Amber mode)
with this SKAA Transmitter the headphones will automatically place
this Transmitter on the headphones green list and the SKAA indicator
will go Green. Now every time you power up your headphones it will
immediately bond with this SKAA Transmitter if it is on and in range
and playing audio.
6. To listen to audio from another SKAA Transmitter double click the
Bond button which enters the headphones into Amber mode again so it
will bond up to any new SKAA Transmitter (New Transmitter means, a
Transmitter not on the headphones green list)
7. Once you have audio with the 2
nd
SKAA Tx you can manually add it the
the headphones green list by pressing and holding the Bond
button for 2 seconds, or just remain bonded and playing audio >30
min at which time the headphones will automatically add this
Transmitter to the green list too. (The headphones Green list has
space for up to 10 Transmitters)
8. Now that you have 2 SKAA Transmitters on the green list you can
bounce between them by simply clicking the Bond button once to
listen to audio on Transmitter 1 and clicking it once again to go the
listen to audio on the 2
nd
Transmitter.
9. Download SKAA cmd for your host device. This App has many features
including allowing you to name all of your SKAA Transmitter’s, and
