* To turn off the alarm, press
button until the alarm symbol disappears on the screen.
Open the battery compartment cover. Insert batteries according to the correct polarity showed in the
compartment. The main unit needs 2 x AAA batteries, and the sensor needs 2 x AAA batteries.
After powering on, the clock will take about 3 minutes to connect with the outdoor transmitter. When
connecting, the signal symbol would be flashing on the screen.
OPERATING INSTRUCTIONS
Large Screen Thermometer Hygrometer
Model: DG-TH1180
POWERING ON
TIME SETTING
ALARM SETTING AND SNOOZE FUNCTION
At normal time displaying mode, press
button once to check the setting alarm time. Press
button once more to turn on the alarm function. There is an alarm symbol on the screen.
At the alarm setting mode, hold pressing
button to set the alarm time. Press or
button to adjust. Hold pressing or button, the digit will move faster. The setting order is hour
minute
exit. If there is no more operation for 30 seconds, it will save the existing setting
and turn to normal display or press
button again to confirm the setting.
The alarm sound will last for 2 minutes and it will change as below:
0-8 seconds
：
BI per second
9-19 seconds
：
BI BI per second
20-59 seconds
：
BI BI BI per second
>60 seconds
：
Keep BI
* When the alarm ring is on, press any other button to cancel the alarm sound. The alarm will be on
again after 24 hours.
At normal time displaying mode, hold pressing
SET
button till entering the time setting mode. The
figure will be flashing. Press or button to adjust the values. Hold pressing or button,
the digit will move faster. The setting order is 12/24 Hr
hour
minute
year
month
date
exit.
If there is no more operation for 30 seconds, it will save the existing setting and turn to normal
display or press
SET
button again to confirm the setting.
At normal time displaying mode, press
SET
button once to check the calendar.
Snooze
SET
MEM
