Digium, Inc.
Page 124
Chapter 3: Telephone System Configuration
Networking
The Networking page is used to configure your general network settings,
as well as your Wide Area Network (WAN) settings, Local Area Network
(LAN) settings, and Timezone settings.
Figure 46: Networking
The General tab, which is the default selection on the Networking page, is
used to specify the following settings:
Hostname - The hostname assigned to the Asterisk Appliance 50.
This name will be used to identify the Asterisk Appliance 50 on your
network.
NTP Server - This field gives you the ability to specify the URL or IP
address of an NTP server. This is useful if you wish to regularly syn-
chronize the Asterisk Appliance 50 time setting with that of an NTP
server.
