Digium, Inc.
Page 100
Chapter 3: Telephone System Configuration
The following settings are available:
Prefix for Paging an Extension - Specify the key sequence used to
prefix a page call to a specific extension. For example, setting this
value to ** would allow you to initiate a page call to extension 6000
by dialing **6000.
Prefix for Dialing an Extension as intercom - Specify the key
sequence used to prefix an intercom call to a specific extension, For
example, setting this value to *# would allow you to initiate an inter-
com call to extension 6000 by dialing *#6000.
Click Save to retain your changes, or Cancel to abandon them.
Then click Settings along the top to specify additional settings for paging
and intercom.
Figure 34: Paging & Intercom Settings
The following setting is available:
Alert-Info Header - This is the value that is sent in the alert info
header to the phone for an intercom call. It is not recommended that
this value be changed from the default of Intercom.
Click Save to retain your changes, or Cancel to abandon them. Once you
have completed making changes to the Paging & Intercom sections,
click Apply Changes to make them immediately available.
