Digium 1TC400BLF, User Manual

Page: 25 / 43

Digium, Inc. Page 25
Chapter 2: Card Installation
Installing DAHDI
1. Download the latest DAHDI drivers with tools. DAHDI is available
for download from:
http://downloads.digium.com/pub/telephony/dahdi-linux-complete
# wget http://downloads.digium.com/pub/telephony/
dahdi-linux-complete/dahdi-linux-complete-current.
tar.gz
2. Expand the downloaded file, compile its contents, and install the
drivers and tools. Substitute the version of DAHDI for the X.X.X in
the command lines below.
# tar -zxvf dahdi-linux-complete-current.tar.gz
# cd dahdi-linux-complete-X.X.X+X.X.X
# make
# make install
# make config
Note: Executing ‘make config’ will install an init script and symlinks
which will allow you to start and stop DAHDI as a service.
3. Load DAHDI drivers into the kernel using the modprobe utility. The
appropriate driver for a TC400 Series card is
wctc4xxp
.
# modprobe wctc4xxp