background image

 

 

8-Port Fast Ethernet 

10" rack-mount Switch 

 
 

 

 

 

 

 

 

Manual 

DN-60013 

 

Introduction

 

The DN-60013 is a compact Ethernet desktop switch that provides wire-speed, a Fast 
Ethernet switching function which allows high-performance, low-cost connections to 
10M/100M bps Ethernet network. The Ethernet Switch delivers all the advantages of 
a switching hub in a compact desktop size and is ideal for small office or SOHO 
network users. 
This switch provides 8 auto-sensing 10/100 Mbps Ethernet RJ-45 ports which 
automatically detect the speed of the devices that you plug into them. This switching 
function allows Full/Half-duplex devices to communicate on the same network 
without having to replace any infrastructure. This flexible feature allows your 
network a timely, economical migration to DIGITUS network switch. 

Summary of Contents for Professional DN-60013

Page 1: ... all the advantages of a switching hub in a compact desktop size and is ideal for small office or SOHO network users This switch provides 8 auto sensing 10 100 Mbps Ethernet RJ 45 ports which automatically detect the speed of the devices that you plug into them This switching function allows Full Half duplex devices to communicate on the same network without having to replace any infrastructure Th...

Page 2: ...ivity Package Contents Ethernet Switch User s manual AC power cord IMPORTANT If any piece is missing or damaged please contact your local dealer or reseller for service Product Specifications DN 60013 8 Port 10 100Base TX Fast Ethernet Switch Ports 8 Port 10 100Base TX MAC Address 1K Mac address table LED Indicator Per port Link Activity Per unit Power Dimension 250mm x 150mm x 42mm W x D x H Oper...

Page 3: ...uccessfully with the device Figure 2 Back view RJ 45 Ports Auto MDI MDIX 8 auto sensing ports of 10Base T 100Base TX connections In general MDI means connecting to another Hub or Switch while MDIX means connecting to a workstation or PC Therefore Auto MDI MDIX means that you can connect to another Switch or workstation without changing pin to pin or crossover cabling AC POWER CONNECTOR PLUG THE FE...

Page 4: ...switch and corresponding device Verify the proper cable type is used and its length does not exceed specified limits Cabling Verify that the cabling type is correct Make sure all cable connectors are securely seated in the required ports Use only standard Unshielded Twisted Pair UTP Category 3 4 5 or 5e cables Use only Category 5 or 5e when connecting with Fast Ethernet Make certain the maximum di...

Reviews: