49
2-7-1 WPS Setup - PBC (Push-Button Configuration)
1.
Right-click the Ralink configuration utility icon located at lower-right
corner of computer desktop and then click ‘Launch Config Utility’.
2.
Click ‘WPS’ menu, and the following settings will appear.
3.
Set ‘Config Mode’ to ‘Enrollee’, and then push the ‘WPS’ button on
your wireless access point (the button used to activate WPS standby
mode may have another name), or use other way to start WPS PBC
standby mode as the instruction given by your wireless access point’s
user manual.
You can also set ‘Config Mode’ to ‘Registrar’. In this mode, this
wireless network card will wait for other WPS-enabled access points
to send WPS pairing requests. Please refer to the instruction given by
your wireless access point’s user manual to understand how to send
WPS requests.
