background image

Getting Started 

 

Setting up a Wireless Infrastructure Network

 

For a typical wireless setup at home (as shown below), please do the following: 
Press MODE Switch Button for AP/ Repeater / Router MODE. 

 
Wireless AP Mode 

The AP/Router is connected to a wired 
network 

then

 transforms the wired 

Internet access into wireless so that 
multiple devices can share the Internet.

 

 

So this mode is fit for

 office, home and 

places where only wired network is 
available.  

 
Wireless Repeater Mode 

The AP/Router copies and reinforces the existing wireless signal to extend the 
coverage of the signal. 

Don't change 

the network’s name (SSID) and 
password 

yet

. This mode is 

especially useful for a large space to 
eliminate signal-blind corners. 

So this mode is fit for

 large house, 

off

ice, warehouse or other 

spaces where the existing signal  
is weak. 

 
Router Mode 

The AP/Router is connected to a DSL 
or cable modem and works as a 
regular wireless router. 

So this mode is fit for the 
environment which

 Internet access 

from DSL or cable modem is available 
for one user but more users need to 
share the Internet.  

Summary of Contents for DN-70184






















Reviews: