KVM-SWITCH
USER MANUAL
(V. 2.0)
DC-OC-12U
Package Contents
–
1 Smart View OC-12U KVM Switch
1 User Manual
Any thing missed, please contact with your vendor.
Features
Controls two PCs with one PS/2 keyboard, PS/2 mouse
and monitor respectively
USB 1.0, 1.1 & 2.0 Specification compliant and supports
UHCI, OHCI & EHCI host controller
Supports the standard PS/2 mouse & Microsoft
IntelliMouse (for Max. 5-button/scroll mouse)
Supports the Windows 98/98se/Me/2000/XP, Linux
Superior video quality - Up to 1920 x 1440, DDC2,
DDC2B, DDC2AB, 200MHz
PC selection by Hot Key
Easy to install--No software required
Hot
Pluggable
Integral keyboard and mouse emulation for PC booting
error free
Auto scan function to monitor PCs
Auto skips over the power-off PC
-1-
Specifications
Function DC-OC-12U
PC Connectors
2
Port Selection
Hot Key
LEDs Selection
2
Emulation
Keyboard USB
Mouse USB
Connector-
Console
Port
Keyboard
1x6 pin mini-DIN Female (PS/2)
Mouse
1x6 pin mini-DIN Female (PS/2)
Monitor
1x HD-15 Female
Connector-
CPU Port
Keyboard
/ Mouse
2x USB A-Type
Monitor
2x HD-15 Male
VGA Resolution
1920x1440 (Max.), DDC2, DDC2B,
DDC2AB, 200MHz
Scan Interval
5 sec ~ 30 sec
Housing Plastic
Weight 380
g
Dimensions (LxWxH)
90x82x26 mm
Cable Length
1.5 meter
Storage Temp
-20°c to 85°c
Operating Temp
0°c to 70°c
Humidity
0% to 95%
Hardware Requirements
Requirement specifications
Console
One highest resolution VGA, SVGA or Multisync monitor.
One PS/2 mouse.
One PS/2 keyboard.
PC
One VGA, SVGA or Multisync card.
One USB port.
Appearance
Top View
-2-
1.
Port LEDs
2.
Console Port Connectors
3.
CPU Port Connectors
Installation
Before the installation, make sure the peripherals of all
PCs are grounded properly and turned off.
1. Connect the monitor, keyboard and mouse with the
Console Port Connectors.
2. Plug the CPU Port Connectors into the PCs.
3. Turn on the PCs.
Operation
1. The function of LED display:
LED DISPLAY
DESCRIPTION
Light off
PC power off
Green light on
PC power on and connected
Green light on & Red
light flashing
PC power on, connected and
selected
Note:
It occurs occasionally that the green light of LED
display is on and the red light of LED display keeps
flashing after shutting down the PC because of the
PC default. The condition will not affect the regular
operation of KVM switch.
2. PC selection
Hot Key Navigation allows you to select PC from the
keyboard directly.
Options for Hot Key Navigation:
Select PC by Hot Key
Command mode
Auto scan mode
Select PC by Hot Key:
Press either left or right [Ctrl] key twice.
Hot Key Operation
Function
[L Ctrl] + [L Ctrl] or
[R Ctrl] + [R Ctrl]
Access between two PCs.
-3-
