background image

 

U

SER 

M

ANUAL

 

23 

R

EGULATORY 

C

OMPLIANCE

 

 

FCC  

This equipment has been tested and found to comply with FCC Part 15 Subpart B § 15.109/15.107 
Class B.   
Operation is subject to the following two conditions: 
• This device may not cause harmful interference 
• This device must accept any interference, including interference that may cause undesired 
operation of the device. 

 

CE

 

This equipment is in compliance with the requirements of the following regulations:   
EN 55022 Class B (2006), 
EN 55024 (1998+A1:2001+ A2:2003), (IEC/EN 61000-4-2 (1995+A1:1998+A2:2001)/-3(2006)) 
 

 

C-Tick 

This equipment is in compliance with the requirements of the following regulations:   
EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005. 

 

VCCI 

This equipment is in compliance with the requirements of the following regulations:   
CISPR22 

©

 IEC: 2005

 

 
 
Disclaimer

 

Information in this document is subject to change without notice. The manufacturer does not make 
any representations or warranties (implied or otherwise) regarding the accuracy and completeness 
of this document and shall in no event be liable for any loss of profit or any commercial damage, 
including but not limited to special, incidental, consequential, or other damage. No part of this 
document may be reproduced or transmitted in any form by any means, electronic or mechanical, 
including photocopying, recording or information recording and retrieval systems without the 
express written permission of the manufacturer. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

All rights reserved.    All trade names are registered trademarks of their respective owners. Features and specifications are subject to change without 
notice. Product may not be exactly as shown in the diagrams.

 

Summary of Contents for DA-70831
























Reviews: