76
14.4.3 Configuring the Duplex Group Channel (11-26)
The UR92 ships from the factory with the default Duplex Group default radio
channel set to 11. You can select channels 11 through 26 for the radio channel.
1. Plug a DT402D throttle into the UR92.
2. Press the
eXIT
key.
3. Press the
OPTN
key then the
eDIT
key.
4. Press the
Y / +
key to increase the channel number, or
5. Press the
N / -
key to decrease the channel number. In the example below,
we have changed the Group name to JBS&J RR and entered 21 for the
channel number.
6. Repeat step 4 or 5 until desired channel is obtained
7. Press the
eNTeR
key to change the
Duplex Group Channel#
for the
UR92. DT402D throttles will need to rejoin on the new channel#
14.4.4 Configuring the Duplex Group Password
The UR92 ships from the factory with the default Duplex Group password of
0000,
the value that disables password requirements
. You may have an occa-
sion when operating in a multi system environment when you may want to
restrict access to your layout and operating system via a tetherless Duplex
Throttle. The password for your Duplex Group may be activated or changed:
1
Plug a DT402D throttle into the UR92.
2. Press the
eXIT
key.
3. Press the
OPTN
key then the
eDIT
key.
4. Enter a 4-digit number using the numbers on the keypad (0001-9999). In
the example below we have entered
1981
as the Duplex Group Password.
5. Press the
eNTeR
key to change the Duplex Group password for the UR92.
The throttle will save the new settings in the UR92 and revert to normal
operation.
