System Components
14
DigiTrak
®
F5
®
SST
®
Operator’s Manual
Any F5 receiver can be upgraded to have the SST capability. The SST upgrade adds the SST option, as
defined below, to the cable transmitter menu.
SST transmitter option
– Enables detection of an SST transmitter when the SST receiver
is in locate mode. This transmitter option must be selected to calibrate and track the SST
transmitter using the receiver. When an SST transmitter is selected, the SST heading
information appears on the locate mode screen and the roll indicator on the receiver
display shows units in degrees (from 0° to 360°) rather than the standard clock positions.
SST Remote Display
The SST remote display is a multi-function remote that receives and displays real-time information
including heading, pitch, roll, temperature, and battery status. Any DigiTrak F Series Display (FSD) or
DigiTrak Multi-Function Display (MFD) can be upgraded to have the SST capability.
An SST remote operates much like a standard remote display, with the function buttons on the keypad
(direction buttons and execute button) and the main menus operating in the same manner. The SST
remote menu options include the standard options plus an option to set the reference heading. This menu
option is discussed further in the
System
Operating Instructions
section.
SST Remote Display
An SST remote operating in cable mode with an SST transmitter will show roll units in degrees (from 0° to
360°), whereas a standard remote display operating with other transmitters shows roll units that cor-
respond to the numbers on a clock (1 through 12).
Display
screen
Direction
buttons
Execute
button
Magnetic
base
