DIGITIZE DGM-32/64, Installation And Maintenance Manual

Page: 48 / 59

DGM INSTALLATION AND MAINTENANCE MANUAL
38 700135-0000 Rev. O
Display External Keypad Status is Disabled. Press TGGL button to
change. Press CLR/SIL to clear display or FUNC to view next
Function.
Press CLR/SIL to clear the display. Press FUNC to advance to the next function.
4.3.37 FUNCTION 36 (DISABLE TROUBLE LED)
This function allows the user to set the TROUBLE LED on the DGM to turn on for
zones that are bypassed. When the DGM scrolls any OFF normal conditions on its
LCD display, it will flash the troubled LED when zones are bypassed. You can turn
this function off. The default for this function is disabled.
To view or change Function 36, p
ress “36”, then press FUNC or, if you are viewing
the previous function, just press FUNC.
The second line of the display will read “36 -
Disable Trouble LED.
”
A message will scroll on the first line:
Trouble LED control for bypassed zones is Disabled. Press the
TGGl button to change. Activate trouble LED when zone is
bypassed. Press CLR/SIL to clear display or FUNC to view next
Function.
Press CLR/SIL to clear the display. Press FUNC to advance to the next function.
4.3.38 FUNCTION 37 (FORCED PARITY)
This function
allows the user to set whether “Forced Parity” is used to communicate
with the System 3505 Prism Lx. This function is set at the factory and should not be
changed.
Note: Changing theForced Parity setting may cause the DGM panel to stop
communicating with the SYSTEM 3505 PRISM LX.
To view or change Function 37, press “37”, then press FUNC or, if you are viewing
the previous function, just press FUNC. The second line of the disp
lay will read “37 –
Force Parity
.”
A message will scroll on the first line:
Forced Parity is Enabled. Enables Forced Parity during
communication with System 3505 Prism Lx. Press CLR/SIL to clear
display or FUNC to view next Function.
Press CLR/SIL to clear the display. Press FUNC to advance to the next function.