DIGITIZE DGM-32/64, Installation And Maintenance Manual

Page: 14 / 59

DGM INSTALLATION AND MAINTENANCE MANUAL
4 700135-0000 Rev. O
- Standby Battery (+/-)
- Supervised Zone Inputs (ZN 1 - ZN 32)
- Keyboard and Display Interface (P3)
- Expansion Board Interface (P0)
- Communication Interface (P1)
- External Keypad Connector (RJ11)
1.4.3 FUSES
F1*, Fuse (Microcontroller) 0.5 Amp (A) Fast-blow
F2, PTC with Auto Reset 2.5 A
F3, PTC with Auto Reset 2.5 A
F1, Fuse (Power supply) 4.0 A
F2, Fuse (Power supply) 5.0 A
* F1 on Microcontroller is only required with -RF option
1.4.4 CONSTRUCTION
Welded 0.063" steel, hinged door with a cam lock and a baked enamel finish. The
removable inner door holds various interfaces, the control panel, and micro-
controller board. The inner door is hinged to allow easy removal by lifting up. The
enclosure is intended for indoor use only. An optional NEMA 3R enclosure is
available.
1.4.5 DIMENSIONS
Refer to the table below for DGM dimensions.
Table 1.1 - Dimensions
DGM-32/64 DGM-32/64-RLY DGM-32/64-M-RLY
HEIGHT (in.) 25.40 25.40 19.50
WIDTH (in.) 12.35 18.35 18.50
DEPTH (in.) 5.06 6.06 6.06
1.4.6 WEIGHT
Refer to the table below for DGM weights.
Table 1.2 - Weights
DGM-32/64 DGM-32/64-RLY DGM-32/64-M-RLY
NET (lbs.) 42 57 45
SHIPPING
(lbs.)
45 60 48