DIGITAL YACHT LTD
SPL2000 User Manual
3. Installation
Before starting installation select a suitable location for the SPL2000 Class B AIS Splitter. The unit is water resistant;
however it should be installed below deck in a dry location. When locating the unit you should consider:
Routing of power and antenna cables to the unit.
Provision of sufficient space behind the unit for cable connections.
Maintaining the compass safe distance of 0.5m.
Visibility of the front panel indicators.
Installation Diagram
Below is a typical installation diagram of the SPL2000 being connected to a Class B Transponder.
Installation Step 2
– Mechanical Fixings
Access to the fixing holes is achieved by removal of the two green decal strips down each side of the SPL2000.
Once fixed in place, the green decal strips can be clicked back in place.
