DIGITAL YACHT LTD
BOATraET Quick Start Guide
•
Ensure that the supply is connected via a suitable fuse or suitable circuit breaker (in the positive power
connection).
A 5A fuse/circuit breaker is recommended for most installations and 10A is the maximum value that
should be used.
•
You will note that there is a White wire soldered to the Red wire. This is the remote switch wire and should always
be connected to the Red wire if no remote switch is required. The BOATraNET will not power up correctly if the
White wire is disconnected from the Red wire and no remote switch is fitted – see wiring diagram.
•
Do not try to turn on the BOATraNET yet.
Installation Step 4
•
The connections on the rear of the BOATraNET are as follows;
•
The only connectors that need to be used for normal operation of BOATraNET are the USB Ports, LAN connector
and Line Out audio connector (green). It is not necessary or recommended to attach a VGA monitor or
keyboard/mouse to BOATraNET.
•
The wires in the nine core Power/IO are as follows;
o
RED
-
Power + (12v or 24v)
o
BLACK
-
Power – (0v)
o
WHITE
-
Remote Power Switch
o
ORANGE
-
COM 1 TX+
o
YELLOW
-
COM 1 RX +
o
GREEN
-
COM 1 Ground (-)
o
BROWN
-
COM 2 TX+
o
BLUE
-
COM 2 RX+
o
GREY
-
COM 2 Ground (-)