background image

Quick Start Guide

DWC-PZV2M72T

WHAT’S IN THE BOX

QSG Manual 

1 Set

Screw & Plastic 
Anchor – 4pcs

1 Set

Manual CD

1 Set

Torx Wrench

1 Set

Template Sheet

1 Set

Username: 

admin

Password: 

admin

Attention: This document is intended to serve as a quick reference page for initial set-up.  
It is recommended that the user read the entire instruction manual for complete and proper camera usage.

Tel: 866-446-3595 / 813-888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

Quick Start Guide

Step 1 – PREPARING TO MOUNT THE CAMERA

Step 3 – INSTALLING THE CAMERA MODULE

Step 2 – CABLING THE CAMERA TO EXTERNAL DEVICES

1.

  Using the mounting template sheet or the camera itself, mark and drill the necessary holes in the wall  

or ceiling. 

2.

  For the installation process, remove the dome cover from the camera module by loosening the screws  

on the dome. Use the wrench provided with the camera.

5.

  Assemble the dome cover over the camera body and detach the protecting film from the dome bubble.

3.

  Pass the wires through the mount bracket and make all necessary connections.

a.  

NETWORK CONNECTIONS – If you are using a PoE Switch, connect the camera using an Ethernet 
cable for both data and power.

b.  

NETWORK CONNECTIONS – If you are using a non-PoE switch, connect the camera to the switch 
using an Ethernet cable for data transmission and use a power adapter to power the camera.

NOTE: If you plug the camera into PoE+ but then plug that switch into a regular PoE it will not work.

Power Requirements

Power Consumption

DC 12V 
PoE IEEE 802. / PoE Class 3

12VDC: 22.5W
PoE+: 25.5W

Resetting the camera:

 To reset the camera, use the tip of  a paper clip or a pencil and press the 

reset button. Pressing the button for five (5) seconds will initiate a camera-wide reset of all the settings, 
including network settings.

1

2

3

Template

Sheet

Reset Button

Power

Network
Connection

4.

  To use the camera’s water proof wiring: 

(1).

  Install the LAN cable into (a).

(2).

  (b) will be assembled to (a) with a 1/4 turn. 

(3).

  Thread (c) tightly to (b).

a

b

c

Reviews: