Digital Projection Mercury Quad Series, Installation And Quick Start Manual

Page: 84 / 130

page 76
Digital Projection Mercury Quad Series
Operating Guide
USING THE PROJECTOR
Rev A March 2017
PIP menu
•
PIP
Turn PIP on and off.
•
Source
Select an input source for the PIP image.
Any combinations are possible between main and PIP input source, as long as:
•
one of the inputs is
HDMI 2
- regardless whether it is used for main or PIP source
•
DisplayPort
, if used, is at a pixel rate below 165 MHz.
•
Position
Set the location of the PIP image on the screen. Choose from
Top-Left
,
Top-Right
,
Bottom-Left
,
Bottom-Right
and
PBP
.
Notes
Some settings may be unavailable
depending on other settings. For
more information, see Possible
Combinations Of Settings further
in this guide.
PIP
Source
Position
PIP
HDMI1
Top-Left
Off