Digital Projection Mercury Quad Series, Installation And Quick Start Manual

Page: 69 / 130

page 61
Digital Projection Mercury Quad Series
Operating Guide
USING THE PROJECTOR
Rev A March 2017
Edge Blend menu
Use this menu to blend together images from an array of two or more projectors.
The feature feathers the light output of the projector within the edges that overlap with
other projectors in the array: as a result, the overlapping edges are evenly lit and easily
blend in with the rest of the image.
•
Edge Blend
Enable and disable
Edge Blend
•
Align Pattern
Add markers to the image showing the edges of the blend area and making the
overlaps more visible to help adjust the physical position of the projectors in the array.
•
Blend Width
Determine the width of the blended regions.
•
Black Level Uplift
Adjust black levels to compensate if the blended regions appear brighter than the rest
of the image.
•
Reset
Reset all
Edge Blend
settings to their factory default values.
Notes
When
Edge Blend
is set to
Off
,
all other edge blend settings are
disabled.
The picture in the blend region
needs to be delivered to all
overlapping projectors, which
may require a special setup of the
source.
Some settings may be unavailable
depending on other settings. For
more information, see Possible
Combinations Of Settings further
in this guide.
Edge Blend
Align Pattern
Blend Width
Edge Blend
Black Le v el Uplift
Reset
Off
u
On
u