Digital Projection Mercury Quad Series, Installation And Quick Start Manual

Page: 47 / 130

page 39
Digital Projection Mercury Quad Series
Operating Guide
USING THE PROJECTOR
Rev A March 2017
Lens menu
•
Lens Lock
When this feature is
On
, all other
Lens
menu items are disabled.
•
Lens Control
Opens a sub-menu, see below.
•
Center Lens
Centers the lens.
•
Lens Memory
Opens a sub-menu, see next page.
Lens Control
Lens Control
settings operate in
Zoom/Focus Adjustment
and
Shift Adjustment
mode. Press
ENTER/OK
to switch between modes.
When in
Zoom/Focus Adjustment
mode:
•
Use the
UP
and
DOWN
arrow buttons to adjust
Zoom
.
•
Use the
LEFT
and
RIGHT
arrow buttons to adjust
Focus
.
When in
Shift Adjustment
mode, use the arrow buttons to adjust
Shift
.
Notes
When adjusting focus and zoom,
you may find it useful to display
the
CrossHatch
test pattern: press
TEST
on the remote control and
navigate through the list of patterns
using the
LEFT
and
RIGHT
arrow buttons.
Lens
Lens Control
Center Lens
Lens Lock
Lens Memory
u
Off
u
Lens Control
[Enter] Shift Adjustment
q
u
p
t
Zoom
Focus
Lens Control
[Enter] Zoom / Focus Adjustment
q
u
p
t
Shift