Digital Projection Mercury Quad Series, Installation And Quick Start Manual

Page: 36 / 130

page 28
Digital Projection Mercury Quad Series
Connection Guide
SIGNAL INPUTS
Rev A March 2017
3D Sync
3D Sync in
Sync input signal – normally only required for
Sequential 3D sources.
•
Connect the 3D sync from your graphics card
or server.
3D Sync out
Sync output signal. This may be affected by the
Sync Offset
setting in the
3D Control
menu.
Connect this to your IR emitter or ZScreen.
Notes
For a complete listing of pin
configurations for all signal and
control connectors, see Appendix
C: Wiring Details in the Reference
Guide
.
The projector can be used with
active 3D glasses. Passive 3D
glasses such as polarized and split
wavelength glasses cannot be used
with this projector.
5
6
4 3
3
3D input
4
3D Sync In
5
3D Sync Out
6
IR emitter or ZScreen
1
Sync In
2
Sync Out
1 2