Digital Projection Mercury Quad Series, Installation And Quick Start Manual

Page: 25 / 130

page 17
Digital Projection Mercury Quad Series
Installation and Quick-Start Guide
CHANGING THE FILTERS
Rev A March 2017
Changing The Filters
Front filter
1. Pull out the filter compartment cover.
2. Replace the filter: slide the old filter out of the compartment, then
push the new filter in its place.
3. Replace the cover
.
Notes
Before changing the filters,
always make sure the projector
is switched off and fully
disconnected from its power
supply.
When changing the filters, avoid
using excessive force as this may
damage the equipment.
In a normal environment the filters
should be changed every 2500
hours.