page 85
Digital Projection INSIGHT 4K Laser Series
Reference Guide
APPENDIX G: EARLIER VERSIONS
Rev C June 2016
Removing the lens
1. Loosen
the two captive screws
1
on the lens remote lock cover, then release
the lock
2
using the provided key.
2. Remove the cover.
Notes
Before changing the lens, always
make sure the projector is switched
off and fully disconnected from its
power supply.
When changing the lens, avoid using
excessive force as this may damage
the equipment.
Take care to preserve the original lens
packaging and protective caps for future
use.
The projector will not power on without
the lens fitted.
1
1
2
