page 20
Digital Projection INSIGHT 4K Laser Series
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Rev C June 2016
Adjusting the lens
1. Press
MENU
.
2. Press the
LEFT
or
RIGHT
button to cycle through the list of menus until
Configuration
appears on the LCD screen. The list of menus is as follows:
•
Title Select
•
Configuration
•
(Title Setup)
•
Information
•
...
3. Press
DOWN
to enter the
Configuration
menu, then press the
LEFT
or
RIGHT
button
to cycle through configuration submenus until you reach
Lens Control
.
Lens controls are accessed in two modes -
Lens Position
and
Focus Zoom
. Press
ENTER
to switch between the two modes.
•
In
Lens Position
mode, use the arrow buttons to shift the lens in the desired
direction.
•
In
Focus Zoom
mode, use:
•
UP
and
DOWN
to change the focus,
•
LEFT
and
RIGHT
to change the zoom.
Notes
Lens Control
Configuration
-
Focus Zoom
•
•
+ - +
Lens Position
•
Configuration
