page 17
Digital Projection INSIGHT 4K Laser Series
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Rev C June 2016
Switching the projector off
1. Press and hold the
POWER
button for three seconds or longer.
The light source switches off and the projector begins cooling down. During
the cooling down process, the
SYSTEM
status indicator flashes amber. The
fan continues to work and a message is displayed on the LCD screen to
show that the projector is still not switched off.
When the fan switches off, the
SYSTEM
status indicator lights a steady
amber to indicate that the projector is now in STANDBY mode.
2. To switch the projector off completely, turn the power switch OFF.
Notes
Do not turn off the projector from
the power switch or disconnect
the power cord while the
projector is working or cooling
down.
Use only the power cable
provided.
Ensure that the power outlet
includes a ground connection as
this equipment MUST be earthed.
Handle the power cable carefully
and avoid sharp bends. Do not
use a damaged power cable.
