Using the menus
Digital Projection E-Vision Laser 15000 Series
Editing projector settings
Menu Name
Highlighted Item
Current Value
Menu Item
Highlighted Value
Value
Value
Value
Menu Item
List of Values
Some menu items may be
unavailable due to settings in other
menus. Unavailable menu items
appear gray
If the highlighted menu item contains a list of values to choose from, you can change the value by doing the
following:
1. Highlight the menu item and press
ENTER/OK
.
2. In the list of values that opens, use the
UP
and
DOWN
arrow buttons to highlight a value, then press
ENTER/OK
again to select the highlighted value.
Using a slider to set a value
Parameter
Value
Slider
Some parameters show a slider. To set such a parameter:
1. Press the
LEFT
or
RIGHT
arrow button, or
ENTER/OK
. The arrow buttons will open the slider and
adjust the value at the same time.
ENTER/OK
will open the slider without altering the initial value.
2. Use the
LEFT
and
RIGHT
arrow buttons to move the slider.
3. When ready, press
RETURN
to exit the slider and return to the menu.
Operating Guide
Rev B April 2021
page 51
Notes
