Digital Projection E-Vision Laser 15000 Series
Signal inputs
Analog inputs and outputs
1
2
3
WIRED
REMOTE
HDBaseT/LAN
HDMI 1
DISPLAYPORT
DVI-D
IN
OUT
HDMI II
IN
TRIGGER
RS-232
V
H
B/Pb
G/Y
R/Pr
VGA
OUT
MONITOR OUT
SDI
3D SYNC
USB
1.
Component
RGBHV, RGsB or RGBS
Set Color Space in the Color menu to Auto or RGB-
Video.
YPbPr or YCbCr
Set Color Space in the Color menu to YPbPr or
YCbCr.
2.
VGA
This input receives analog signals from a computer.
When using this input, it is best to use a fully wired
VGA cable to connect the source to the projector.
This will allow the source to determine the projector’s
capabilities via DDC and show an optimized image. Such cables can be identified as they have a blue connector shell.
3.
Monitor Out
Connect an analog monitor (VGA) cable to the 15-pin D-type to output the signal received on the VGA input.
Rev B April 2021
page 40
Connection Guide
Notes
