Using the projector
Digital Projection Ltd. E-Vision Laser 13000 WU Series
Memory
Memory
Recall Memory
Default
Save Settings
Preset A
Presets from one input
cannot be applied to
another input.
See on page 1 for
information about the
parameters that can be
saved in a memory preset.
The current image settings can be saved as a preset, which you can recall later. The default settings can be
recalled at any time as well.
Up to four custom presets can be stored for each input.
The following settings are saved in a preset:
l
From the
Image
menu —
Dynamic Black, Gamma, Brightness, Contrast, Saturation, Hue, Sharpness
and
Noise Reduction
l
From the
Color
menu —
Color Space, Color Mode, ColorMax, Color Temperature, Dynamic Black,
RGB Lift
and
RGB Gain
l
From the
Geometry
menu —
Aspect Ratio
and
Overscan
.
To recall a saved preset:
l
Select
Recall Memory
and press
ENTER/OK
, then select a preset from
Preset A
to
Preset D
. Select
Default
to load factory default values.
To save a preset:
l
Select
Save Settings
and press
ENTER/OK
, then choose from
Preset A
,
Preset B, Preset C
and
Preset D
.
Operating Guide
Rev A June 2019
page 81
Notes
