Digital Projection Ltd. E-Vision Laser 13000 WU Series
Using the projector
Setup menu
Setup
Orientation
Auto-front
Cooling Condition
Auto
High Altitude
Auto
Screen Setting
16:10
ColorMax Setting
►
Clock Adjust
►
Standby Mode
Normal
Startup Logo
Original
Blank Screen
Original
Auto Source
Off
▼
Auto-front
automatically
detects the projector’s
position and sets Table or
Ceiling orientation
accordingly.
Custom Logo
. Please
request a Custom Logo
Upload Tool from your
local Digital Projection
Service provider to upload
a custom logo.
l
Orientation
Choose from
Front Tabletop, Front Ceiling, Rear Tabletop, Rear Ceiling
and
Auto-front
.
l
Cooling Condition
Choose from
Table, Ceiling, Freetilt
and
Auto
.
l
High Altitude
Choose from
On, Auto
and
Quiet
.
l
Screen Setting
Choose from
16:10, 16:9
and
4:3
.
l
ColorMax Setting
Set up user-defined color gamut values.
l
Power On/Off
Access the submenu to set up automatic projector power on and power off.
l
Clock Adjust
Access the submenu to set current date and local time.
l
Standby Mode
Choose from
SuperECO
,
ECO
and
Normal
.
SuperECO
uses minimal power and disables power ON via LAN.
ECO
uses a low power setting but enables power ON via Ethernet port only.
Normal
enables power ON via both HDBase-T/LAN and Ethernet ports.
l
Startup Logo
Choose from
Off
,
Original
and
User
.
Select original to display the Digital Projection Ltd. logo on startup. Select User to display a custom logo. Use the projector controller application to set the
custom logo for the User option.
l
Blank Screen
Choose from
Original, Logo, Black, Blue
and
White
.
l
Auto Source
If this setting is
On
, the projector will automatically search for an active input source.
Highlight the
DOWN
arrow at the bottom of the page and press
ENTER/OK
to navigate to the second Setup menu page.
Rev A June 2019
page 76
Operating Guide
Notes
