Specification Sheet
E-Vision 7500 WUXGA 3D (Preliminary)
TBA Lumens | Contrast Ratio: 2,400:1 (Dynamic Black) 1,000:1 native | Part No:114-305
Colour System:
DMD Specification:
6 Segment RYGCWB Colour Wheel for maximum brightness.
6 Segment RGBCMY Colour Wheel for optimised
colourimetry - user swappable.
Display Type:
1 x 0.67" DarkChip™ DMD™
1920 x 1200 pixels native.
Fast transit pixels for smooth greyscale and improved
contrast.
Aspect Ratio:
16x10
Fill Factor
87%
Key Features
Video & Graphics Processing
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
BrilliantColor™ for increased system brightness.
DynamicBlack™ for improved black levels in dark scenes.
High Bandwidth Digital & Analog Receiver with 10 Bit A-D.
Independent control of hue, saturation and gain for primary and secondary colours.
The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with
pixel based, motion adaptive interpolation and auto cadence correction.
24p and 1080p native display.
Geometry Correction
Vertical keystone correction.
HDBaseT® Interface
Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows projector to be placed up to 100m from source.
Source Compatibility:
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via DVI, HDMI, DisplayPort or VGA.
DVI single link with HDCP compliance.
Component Video (SD and HD) via YPrPb, RGBHV, RGB or RGBS.
