24
2.12.5 Removal of the Turnover Initial Position
sensor
Function
This sensor decides the origin position for the turn unit.
1) Refer to section 2.7 and remove the turnover and
card feed motor.
2) The sensor can be removed after the screw
&
has
been removed.
2.12.6 Removal of the Card Near-empty Sensor
Function
When the number of remaining cards drops to about 20
cards (for the card 0,76mm thick) , the electronic buzzer
sounds.
1) Refer to section 2.16.1 and remove the Main circuit
board.
2) Remove the card tray.
3) The sensor can be removed after the screw
(
has
been removed with a long screwdriver from the hole
in which the Main circuit board is located.
2.12.7 Removal of the No Card Sensor
This sensor checks whether there are remaining cards
or not. An error is caused when the remaining quantity
becomes zero.
1) Refer to section 2.7 and remove the turnover and
card feed motor.
2) The sensor can be removed after the screw
*
has
been removed.
2.12.8 Removal of the Retransfer roller/Remedial
Roller Sensor
Function
This sensor detects the origin of the retransfer roller and
the bend remedial roller.
Energization is performed only when a roller is in this
position.
1) Remove the screw
&
.
2) Slide the sensor to the side, as the lever is inserted
into the sensor.
15
1
Card near-empty
sensor
No Card
sensor
Turnover initial
position sensor
18
19
KWS0757-002
KJJ46271-003
KJJ46271
-003
KJJ46271
-003
12
1
11
11
Head cooling fan
17
TSS0239-V
TSS0239-U
5
(TSS0189)
3
(TSS0182)
15
CLAMP
(T2,H2)
H2
P4
17
17
17
T1
T2
1
15
(TSS0181)
(-010)
(-010)
17
HEATER SENSOR SA
DR PCB BKT SA
H1
T1
T2
12
CLAMP
(P4)
F1
CLAMP
(F1)
(FD M.MOTOR ASY)
A
B
