Chapter 4 Troubleshooting
4-5
4.2
Recovery Procedure
4.2.1
PS-A with no Pre-installed OS
Refer to the instruction manual for the installed OS and recover the OS.
After the OS is recovered, download drivers and utility software from the Pro-face support site “Otasuke Pro!”.
4.2.2
PS-A with Pre-installed OS (Windows 2000)
Use the following steps used to recover the Windows
®
2000 Multi-Language Pre-installed Hard Disk.
(1)
Turn on the power of PS-A and immediately press the [F2] key to enter the BIOS setup screen. Insert the
Recovery media into the drive.
(2)
On the [Boot] menu, move “USB CDROM” to the top of the screen using the [+] key or the [-] key.
(3)
Press the [F10] key and select [Yes] for [Save configuration changes and exit now?] to save the settings
and restart the PS-A unit.
SEE
1.2.2 Setting Up the PS-A Dedicated Software (page1-3)
• Specify [Disabled] for the USB-Device29 and the Function7 of the BIOS when
you install commercial Windows
®
, using a USB CD/DVD-ROM drive.
• After performing hard disk recovery, the PS-A unit’s hard disk is returned to its
factory shipped condition.
• For recovery, a USB keyboard and USB CD-ROM drive (both on the market) are
required.
SEE