Digital Equipment Pro-Face PL-6700 43 Series, User Manual

Page: 25 / 97

Chapter 2 - Specifications
PL-6700 43 Series User’s Manual 2-6
Display Area
Display output area. The built-in SVGA controller
supports PC compatible architecture.
Touch Panel
This high-resolution analogue touch panel allows you to
configure a keyboard-less system.
Front Maintenance Cover
Open this cover to connect the optional FDD unit or
memory card interface unit.
IrDA
When the optional PL-IR100 is installed, infra-red sig-
nals are sent and received by this unit.
Keyboard Connector
A PS/2 compatible keyboard is connected here.
Floppy Disk Insertion Slot
This slot is used if the optional FDD unit or memory
card interface is installed.
RS-232C Connector (COM1)
RS-232C Connector (COM2)
RS-232C Connector (COM3)
RS-232C interfaces (DB 9-pin male connectors), which
allow communication with other computers or connec-
tion to peripheral devices.
HDD Cover
When an HDD is installed, this cover is removed.
Analog RGB Connector
A PC/AT compatible multi-scan monitor can be con-
nected here.
Printer Connector (LPT1)
Centronics standard interface (DB 25-pin female connec-
tor), which connects a parallel device, such as a printer
(supports ECP/EPP)
Expansion Slots
A variety of expansion boards, both Digital’s and
other makers, can be installed here.
“3-1 Available Options andExpansion Boards”
The PL-6700T is equipped with four (4) expansion
slots. Seen from the front of the unit, these slots are
numbered 1, 2, 3 and 4.
With cover opened:
(Drawings shown here are for
the PL-6700T unit)
2-4 PL External Features
2-4 PL External Features