GLC2400/2500/2600 Series User Manual
1–7
Chapter 1 – Introduction
Printer Interface Cable
1.
For details about the range of connectable PLCs, refer to the
GP-PRO/
PBIII for Windows Device/PLC Connection Manual
(included with
screen creation software).
Serial Interfaces
All optional equipment listed here is produced by Digital Electronics Corporation.
Available Software
Tool Connector
1.3
Accessories
Product Name
Model No.
Description
GP-PRO/PB III
C-Package 03
GPPRO-CNT01W-P03
Used to create screen and logic program data on your PC for the
GLC unit.
Product Name
Model No.
Description
Data Transfer Cable
GPW-CB02
USB Data Transfer Cable
GPW-CB03
Connects the GLC to a personal computer. Transfers screen data
and user programs.
Product Name
Model No.
Description
RS-232C Cable
*1
GP410-IS00-O
GP230-IS11-O
GP230-IS12-O
(for multi-link)
RS-422 Terminal Block Adapter
*1
GP070-CN10-O
Conversion adapter to convert serial data to
RS-422 format.
Mitsubishi A, QnA, FX Series 2 Port
Adapter II
GP070-MD11
Interface unit that allows use of both GLC and Mitsubishi A, Q, C
and FX series equipment in the same location.
2 Port Adapter II Cable
GP070-MDCB11
Connects the GLC to 2 Port Adapter II.
Mitsubishi A Series Programming
Port I/F Cable
GP430-IP10-O
Mitsubishi FX Series Programming
Port I/F Cable
GP430-IP11-O
Interface cables between the host (PLC) and the GLC.
RS-422 Cables
*1
Connects directly to Mitsubishi's PLC I/F Programming Console.
Simultaneous use of program console, however, is not possible.
Product Name
Model No.
Description
Printer Cable
PSM-PRCB00
Connects the GLC and a commercial type printer.