FP3700-T41 User Manual
3-7
3.2 Wiring
2) Connect the AC plug to the FP unit’s AC connector, as shown in fig. 2.
3) Insert the Cord Clamp Lock Pin into the FP unit’s Lock Pin Hole.
4) Adjust the Lock Pin’s Lock Tab length until it is securely held.
Removing the AC Power Cord
5) While lifting up on the Lock Pin’s Lock Tab Release, pull the AC Plug, Plug Collar and
Cord Clamp backwards to disconnect it from the FP.
6) Open the Cord Clamp (opposite of step 1) and remove the AC Power Cord from the
Cord Clamp.
3.2.2
Power Cable Connection
USB Cable Strap Attachment Procedure
1) Connect the USB cable to the connector.
2) Insert the cable strap into the cable strap holder as shown in figure 1, and tighten the
strap until the cable is secured in place.
USB Cable Strap Removal Feature
3) Push in the cable strap's stopper until the cable strap band is unlocked, then remove the
band.
4) Disconnect the USB cable.
Figure 1
Stopper
USB cable strap
USB Cable
USB cable strap holder
Figure 2
Cord Clamp Lock Pin
Lock Pin Hole
Lock Tab Release
Cord Clamp
AC Plug Collar
AC Plug
AC Connector
