36
EVOLUTION LX
SYSTEM MANUAL Issue 1.0 5 DEC 2009
PASSWORD PROTECTION (LX1 WITH OP 1,2,3 OR LX 2)
The
LX
x contains a password function designed
to limit access to the MESSAGE ENTRY mode
and prevent unauthorized changing of message
lines. To activate this function, switch the unit
off, then press and hold
while switching the
unit on. The display changes and requests the
default password (which is 12345). Enter the
12345.
The screen to the left appears and prompts the
operator to ENABLE PASSWORD
A response of N maintains the current password
and disables password protection.
If the response Y is selected the screen at the
left appears to prompt the user to enter a new
password. Enter the new 5-character password
any combination of letters and numbers may be
used. Once this has been completed, the unit
will not allow message editing without the entry of the password.
NOTE: If the new password is misplaced or forgotten, contact
the factory.
PASSWORD XXXXX
ENABLE
PASSWORD
YES OR NO Y/N
PASSWORD XXXXX