4
EVOLUTION LX
SYSTEM MANUAL Issue 1.0 5 DEC 2009
CHANGING SYSTEM DATE AND DAY OF WEEK CODES
(LX1 WITH OP 2,3
or LX 2)
When the unit is in the STOPPED Mode
pressing the DATE
key allows the user to
change the system date. If there are no
changes press the N key to return to the
STOPPED Mode.
Press the Y key to change the date.
The system will prompt the user first for the
Month (enter 2 digits), then the Day (2 digits)
and finally the year (2 digits).
After the date is entered the system requests
the actual date day of week. This parameter is
usually set to 1 for Sunday, 2 for Monday etc.
The day of the week can be entered into a
message as either a number 1-7 or as a letter
A-G. The day of the week is entered into a
message by pressing the
key while in the
MESSAGE ENTRY mode.
After the data is entered the system displays
the currently entered date and pressing the N
key returns the user to the STOPPED Mode,
or press Y to the correct the date.
PRESENT SETTING
ANY CHANGES Y/N
01/04/00
PRESENT SETTING
ANY CHANGES Y/N
01/04/00
ENTER MONTH-
PRESENT SETTING
ANY CHANGES Y/N
04/23/05
PRESENT SETTING
ANY CHANGES Y/N
01/04/00
ENTER DAY-
PRESENT SETTING
ANY CHANGES Y/N
01/04/00
ENTER YEAR-
< - - SELECT - - >
DAY OF WEEK- 1
DAY FORMAT
1= NUMERIC
2= LETTERS