2
EVOLUTION LX
SYSTEM MANUAL Issue 1.0 5 DEC 2009
KEYPAD KEY DESCRIPTIONS
.
This is the manual cycle key. When in the STOPPED Mode, pressing this
key causes the printer to print one code.
This is the Print key. Use it to place the unit in the PRINTING or
STOPPED Mode
This is the Purge key. Use it to purge ink for maintenance purposes. The
unit must be in the STOPPED Mode to use this key.
This is the Head Select key. Use it to select the address of the head to be
communicated with. Or day of week in MESSAGE ENTRY mode.
Use this arrow to decrease values, and use it to move the cursor in the
message line while editing the message.
Use this arrow to increase values and use it to move the cursor in the
message line while editing the message.
Use this arrow to move the cursor between the message lines while in
Edit mode and building a message. Increment LCD contrast
Use this arrow to move the cursor between the message lines while in
Edit mode and building a message. Decrement LCD contrast
This key is the Message Storage key. Use it to store and to recall
individual messages. Enters prefix in MESSAGE ENTRY mode.
This is the Delete key. Use it to backspace to delete a character when
mistyped as well as to exit from certain menus.
This is the Message Entry key. Use this key to enter the MESSAGE
ENTRY mode, to input a code or to edit a message.
The Date key. Use this key to enter the Date in MESSAGE ENTRY Mode.
(LX1 WITH OP 2 or above or LX 2). Change Date in STOPPED Mode.
The Time key. Use this key to enter the Time in MESSAGE ENTRY
Mode. (LX1 WITH OP 2 or above or LX 2). Change Time in STOPPED
Mode.
This is the Sequence Number or Lot Counter key. Use this key to enter
the Sequence Number in MESSAGE ENTRY Mode. (LX1 WITH OP 2 or
above or LX 2). Sets SEQ/LOT operating parameters in STOPPED mode.
This is the Enter or Return key. When pressed, the unit will accept input
and exit certain menus.
This key selects the Print Delay and Offset Dates (1 or 2) in MESSAGE
ENTRY mode (LX1 WITH OP 3 or LX 2)
This key selects the Line Speed and the shift code in the MESSAGE
ENTRY mode (LX1 WITH OP 3 or LX 2)
This key selects the Font size in the MESSAGE ENTRY mode.
In the STOPPED Mode pressing this key displays the current fonts loaded
S1
Pressing this key while in the MESSAGE ENTRY mode enters special
characters. In STOPPED mode enter the Prefix for Mixed Raster in the
LX2.
S2
This key enters special customer Logos in MESSAGE ENTRY mode. In
STOPPED or PRINTING the S2 key reverses LCD colors.