Installation & Operations Guide - SmartSource Micro Elite IJ
Rev. D
8227 5727-003
Page 12 of 27
Section 2
Operating the Unit
Powering on the Unit
Press the power button. The blue status light within the button will light. When the unit is ready for use, the light will
stay on.
Using the power/start-stop button, and the
meaning of the status light
The power/start-stop button has various functions when the machine is working. The blue status light within the button
tells you the condition of the machine.
Function
Operation of button & Blue Status LED
Power on
Press and hold the button for more than 2 seconds-
power button light will be on for a couple seconds and
the will be
blinking
Power off
Press and hold the button until the power button light
turns off
Clear document
from track –
‘SmartClear’
function
Press the button for more than 1 second and less
than 5 seconds, then release the button. After 1
second, light will blink more quickly to show that
‘SmartClear’ function has been selected.
The track will start and eject the stopped document,
then stop.
.
