DIGISYSTEM LABORATORY INSTRUMENTS INC.
INSTRUCTION MANUAL FOR DRY BATH DSD-100D & DSD-200D
Warnings:
* The surface is hot. Do not touch.
* Do not put any objects on the top of the instrument.
* Please keep the environment ventilated.
* The instrument should be placed in a low relative humidity and low dust place away from water source.
1. Connect with power supply. Please make sure the power voltage is the same as the voltage shown on the
label stuck on the back of machine.
2.
Press “ON/OFF Button”, then you
will see the
“Power indicator’ becomes
green. Wait for about 5 seconds;
you can see that on the display screen, the top row is the present temperature value (PV) and the bottom
row is the setting temperature value (SV).
3.
Set temperature
: you will see . Press or to adjust SV value and then press to
enter the value.
4.
Set time:
Select time mode: Continouos mode or Timer mode .
4.1
Press to set Continuous mode.
OUT2
indicator on display screen will disappear. The
setting is finished. Go to Step 6.
4.2
Press to set Timer mode. OUT2
indicator on screen will appear.
4.2.1 You will see or .
4.2.2 Use
or
key to select time unit
(hour) or
(minute). Press
to enter the value. Press
to next setting.
4.2.3 You will see . Use or key to adjust the time value. Press to enter the
value. Press to next setting.
Block lifter
Block
Block
