Digisol DG-GS4826S, Management Manual

Page: 716 / 1344

C
HAPTER
27 | Remote Monitoring Commands
– 716 –
u
The specified events determine the action to take when an alarm
triggers this event. The response to an alarm can include logging the
alarm or sending a message to a trap manager.
E
XAMPLE
Console(config)#rmon event 2 log description urgent owner mike
Console(config)#
rmon collection
history
This command periodically samples statistics on a physical interface. Use
the no form to disable periodic sampling.
S
YNTAX
rmon collection history controlEntry index
[[ owner name ] [ buckets number ] [ interval seconds ]] |
[ buckets number ] [ interval seconds ] | interval seconds
no rmon collection history controlEntry index
index – Index to this entry. (Range: 1-65535)
number – The number of buckets requested for this entry.
(Range: 1-65536)
seconds – The polling interval. (Range: 1-3600 seconds)
name – Name of the person who created this entry.
(Range: 1-127 characters)
D
EFAULT
S
ETTING
1.3.6.1.2.1.16.1.1.1.6.1 - 1.3.6.1.2.1.16.1.1.1.6.26/50
Buckets: 8
Interval: 30 seconds for even numbered entries,
1800 seconds for odd numbered entries
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
u
By default, each index number equates to a port on the switch, but can
be changed to any number not currently in use.
u
If periodic sampling is already enabled on an interface, the entry must
be deleted before any changes can be made with this command.
u
The information collected for each sample includes:
input octets, packets, broadcast packets, multicast packets, undersize
packets, oversize packets, fragments, jabbers, CRC alignment errors,
collisions, drop events, and network utilization.