Digisol DG-GS4826S, Management Manual

Page: 115 / 1344

C
HAPTER
4 | Basic Management Tasks
Displaying Switch Hardware/Software Versions
– 115 –
D
ISPLAYING
S
WITCH
H
ARDWARE
/S
OFTWARE
V
ERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI R
EFERENCES
u
"System Management Commands" on page 647
P
ARAMETERS
The following parameters are displayed in the web interface:
Main Board Information
u
Serial Number – The serial number of the switch.
u
Number of Ports – Number of built-in ports.
u
Hardware Version – Hardware version of the main board.
u
Internal Power Status – Displays the status of the internal power
supply.
Management Software Information
u
Role – Shows that this switch is operating as Master or Slave.
u
EPLD Version – Version number of EEPROM Programmable Logic
Device.
u
Loader Version – Version number of loader code.
u
Diagnostics Code Version – Version of Power-On Self-Test (POST)
and boot code.
u
Operation Code Version – Version number of runtime code.
u
Thermal Detector – The first detector is near the air flow intake vents
on both models. The second detector is near the switch ASIC on the
DG-GS4826S and near the physical layer ASIC on the DG-GS4850S.
u
Temperature – Temperature at specified thermal detection point.
W
EB
I
NTERFACE
To view hardware and software version information.
1. Click System, then Switch.