Digisol DG-FS4528P, Management Manual

Page: 734 / 973

C
HAPTER
35 | Address Table Commands
– 734 –
clear mac-address-
table dynamic
This command removes any learned entries from the forwarding database.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#clear mac-address-table dynamic
Console#
show mac-address-
table
This command shows classes of entries in the bridge-forwarding database.
S
YNTAX
show mac-address-table [ address mac-address [ mask ]]
[ interface interface ] [ vlan vlan-id ]
[ sort { address | vlan | interface }]
mac-address - MAC address.
mask - Bits to match in the address.
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-8)
vlan-id - VLAN ID (Range: 1-4094)
sort - Sort by address, vlan or interface.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
The MAC Address Table contains the MAC addresses associated with
each interface. Note that the Type field may include the following types:
Learned - Dynamic address entries
Permanent - Static entry
Delete-on-reset - Static entry to be deleted when system is reset
The mask should be hexadecimal numbers (representing an equivalent
bit mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified
MAC address. Enter hexadecimal numbers, where an equivalent binary