Digisol DG-FS4528P, Management Manual, Page: 491 / 973

C
HAPTER
22 | System Management Commands
Time
– 491 –
sntp client
This command enables SNTP client requests for time synchronization from
NTP or SNTP time servers specified with the sntp server command. Use the
no form to disable SNTP client requests.
S
YNTAX
[ no ] sntp client
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
The time acquired from time servers is used to record accurate dates
and times for log events. Without SNTP, the switch only records the
time starting from the factory default set at the last bootup (i.e.,
00:00:00, Jan. 1, 2001).
This command enables client time requests to time servers specified via
the sntp server command. It issues time synchronization requests
based on the interval set via the sntp poll command.
E
XAMPLE
Console(config)#sntp server 10.1.0.19
Console(config)#sntp poll 60
Console(config)#sntp client
Console(config)#end
Console#show sntp
ntp server Specifies NTP servers to poll for time updates GC
show ntp Shows current NTP configuration settings NE, PE
Manual Configuration Commands
clock summer-time
(date)
Configures summer time
*
for the switch’s internal
clock
GC
clock summer-time
(predefined)
Configures summer time
*
for the switch’s internal
clock
GC
clock summer-time
(recurring)
Configures summer time
*
for the switch’s internal
clock
GC
clock timezone Sets the time zone for the switch’s internal clock GC
clock timezone-
predefined
Sets the time zone for the switch’s internal clock using
predefined time zone configurations
GC
calendar set Sets the system date and time PE
show calendar Displays the current date and time setting NE, PE
* Daylight savings time.
Table 49: Time Commands (Continued)
Command Function Mode