Digisol DG-FS4528P, Management Manual

Page: 454 / 973

C
HAPTER
22 | System Management Commands
System Status
– 454 –
E
XAMPLE
Console#show process cpu
CPU Utilization in the past 5 seconds : 3.98%
Console#
show running-
config
This command displays the configuration information currently in use.
S
YNTAX
show running-config interface
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-8)
vlan vlan-id (Range: 1-4093)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Use this command in conjunction with the show startup-config
command to compare the information in running memory to the
information stored in non-volatile memory.
This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
MAC address for the switch
SNTP server settings
SNMP community strings
Users (names, access levels, and encrypted passwords)
VLAN database (VLAN ID, name and state)
VLAN configuration settings for each interface
Multiple spanning tree instances (name and interfaces)
IP address configured for management VLAN
Spanning tree settings
Interface settings
Any configured settings for the console port and Telnet
When the system pauses after displaying the first page, press “a” to
force the system to display the rest of the configuration settings
without pausing.